Details
CARVER Custom 9MM 3 port compensator for your 1.0 M&P. These comps were designed to fit the countour of the slide and to appear as an extension of the slide. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.
Benefits of this compensator include:Large expansion chamber leading into 2 retaining ports
- Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
- Comp weight 1.3 oz
- Guiderod channel under compensator
- Controls muzzle flip and recoil up to 45% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
- Stylish and effective!!
- Excellent for IPSC Major or minor loads
The comps are threaded for 1/2 x 28 tpi barrels. Though they will fit an M&P threaded barrel that's intended for a suppressor, we recommend the use of a shorter barrel that will allow the compensator to snug up to the end of the slide. Recommended length for Full Size M&P threaded barrels is 4.655". We stock custom barrels for the M&P that will fit with the compensator. We stock custom barrels for the M&P that will fit with the compensator. If you have any questions, please feel free to call or email.
Compensator will fit the following 9MM Smith & Wesson model: - M&P Full Size (4.25")
Recoil springs recommended if using factory ammunition or equiavalent. Major loads will require heavier springs such as a 14-16lb. +P loads from 130 PF to 150 PF should be used with a recoil spring from 12 lb to 14 lb. It’s important to properly lube the slide when using any compensator.
NOW AVAILABLE......CARVER Custom "Big Mouth" magwells for the M&P plus scope mounting systems"