Details
CARVER Custom 4 port 10MM Compensator for the Glock 40 includes 4 ports on the top with 3 exhaust ports on each side, totaling 10 ports plus is configured to fit the "bullnose" of the Glock 40 slide when using a KKM Precision G40 threaded barrel.
Tame the recoil and muzzle flip of your 10MM Glock 40 with a CARVER Custom 4 Port Decelerator Aluminum Comp. Thread size currently available for AlphaWolf and KKM suppressor barrels with 9/16 X 24 tbi. Please note that if the use of this comp is intended to be used with an AlphaWolf 10MM barrel for G40, there will be a small 1/8" gap between the rear of the comp and the front of the slide. AW barrels are 1/8" longer than the KKM Precision G40 threaded barrel. When using the KKM barrel, there will be little to no gap.
Easy installation. Compensator is made out of 6061 aircraft aluminum with a black or silver anodized finish.
The 4 Port Comp works great with +P factory ammo and handload equivalents. A proven product for hunting or IPSC, GSSF and Bowling Pins. Great for hunting, too. Please note, you may need to use a lighter recoil spring when using a compensator with light handloads.
# Ports | Factory 180 | Factory 200 +P | Major Handlloads |
3 | 14-15 | 15-16 | 16-18 |
4 | 14-15 | 15-16 | 16-18 |
Please note: Actual spring weight needs may vary based upon ammo/reload results. In many cases, your factory recoil spring may work fine. We suggest the following before changing your recoil spring when using this compensator:
1. With the compensator correctly installed, using your stock recoil spring, load one round into your magazine
2. Shoot one shot and check to see:
a. Did the slide lock back
b. Did your brass eject farther than 2-3 feet to your right?
If the above test worked with your factory spring, using the ammo of your choice, you may not need an additional recoil spring. Due to the many different bullet weights and powders available for this round, different brands of powders will create different results. Reloadiing this round provides unlimited results.
Designed for the following Glock Model:
- G40
If you have any questions, please contact us at sales@carvercustom.com. Phone: 904-800-6333, ext 2