in
Details
If you already have an Apex Forward Set Sear & Trigger Kit installed in your M&P and would like to upgrade the trigger only, you can find the Red Flat-Faced Forward Set Trigger here.
Applicable To What Gun(s)
Works with all Smith & Wesson M&P Pistols (excluding M&P M2.0) in all centerfire calibers and configurations.
Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
Requires the use of the sear housing block designed for the large size sear plunger and spring (current production as of June, 2011)*
What It Does
Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber, the Apex Flat-Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights.
Apex Flat-Faced Forward Set Trigger
Expected Results
– Lowers pull weight to between the 3lb (silver spring) and 4lb (green spring) mark (dependent on trigger return spring installed)
– Smooth uptake and reset
– Reduces pre-travel and over-travel
– Reduced reset
– Total trigger travel similar to most factory 1911 type pistols
– Center mounted pivoting safety maintains factory safety values
– Easy to install (watch the installation video)
In The Package
1 ea. Red Anodized Flat-Faced Forward Set Trigger
1 ea. Forward Set Sear
1 ea. Ultimate Striker Block Kit (Striker Block, Spring and Talon Tactical Tool)
1 ea. Forward Set Spring Kit (White Trigger Return Spring, Green Trigger Return Spring, Polymer Slave Pin, Sear Spring and Blue RAM Spring)
Installation Resources
M&P Disassembly Video
Apex Trigger Body Install Video
M&P Reassembly Video
Apex Ultimate Striker Block Install Video
Notes
This particular product usually requires a slight modification to the trigger bar loop for proper function. Please see the Trigger Bar Loop Adjustment video on how to tune the trigger bar.
*This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, we strongly advise you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore we cannot guarantee proper function without the appropriate size sear plunger and spring. Modern sear housing blocks can be found on Brownells.com and other online firearms product retailers.