CARVER M&P .45 Compensator (3 Port) - Factory Barrel

Compensator (3 Port)

Benefits of this compensator include:

•  Large expansion chamber leading into 1 retaining port
• Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
• Comp weight 1.2 oz
• Guiderod channel under compensator
• Controls muzzle flip and recoil up to 40% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
• Stylish and effective!!
• Excellent for IPSC Major, bowling pin or fun shooting
  
  The comps are threaded for .578 x 28 tpi barrels. They will fit an M&P threaded barrel that's intended for a suppressor.

When using the CARVER Custom compensator system, you will need to use a lighter recoil spring to compromise the slide speed since the compensators are so efficient they are reducing the amount of energy normally utilized by the slide to recycle.

We recommend the use of our SS CARVER Uncaptured Guiderod for ISMI springs for use with either compensator.  Wolff guiderods that use Wolff springs will not work with this compensator.

If you are planning to shoot the following ammunition, you will need the recommended recoil spring with an uncaptured guiderod:

185 Grain .45 ACP Ammo

• With 3 Port Compensator - Use a 15 lb recoil spring

If you have any questions about our "new" M&P .45 Compensator, please contact us at sales@carvercustom.com.