Details
CARVER Custom .40 Cal 4 port compensator for your M&P. These comps were designed to fit the countour of the slide and to appear as an extension of the slide. The compensators are made out of tough 6061-T6 aircraft aluminum and have Type 2 anodizing in two colors: Black and Silver.
Benefits of this compensator include:
- Large expansion chamber leading into 2 retaining ports
- Porting on the sides, allows more air to rush into the compensator, pushing more exhaust up, allowing more control of the muzzle
- Comp weight 1.1 oz
- Guiderod channel under compensator
- Controls muzzle flip and recoil up to 45% dependent upon type of ammunition used. The higher power factors will deliver more efficiency.
- Stylish and effective!!
- Excellent for IPSC Major
This comp is threaded for 9/16 x 24tpi barrels. Though they will fit an M&P threaded barrel that's intended for a suppressor, we recommend the use of a shorter barrel that will allow the compensator to snug up to the end of the slide. Recommended length for 1.0 Generation or 2.0 Generation Full Size M&P threaded barrels is 4.70" and for the 1.0 or 2.0 Generation Pro/L M&P threaded barrels 5.45". We stock custom barrels for the M&P that will fit with the compensator. If you have any questions, please feel free to call or email.
Compensators will fit the following 1.0 and 2.0 Generation.40 Cal Smith & Wesson model: - M&P Compact (4.0")
- M&P Full (4.25")
- M&P Pro/L (5.0")
Recoil springs recommended if using factory ammunition or equiavalent.
- Major loads will require heavier springs such as a 17-18lb.
- 14-15 lb spring for soft .40 Cal ammunition up to 150K PF
Now available CARVER Custom "Big Mouth" magwells for the M&P plus scope mounting systems"