GEN 4 CARVER 3 Port Comp 9MM for Glock

"Now Available for GEN 4 Models"

Tame the recoil and muzzle flip of your GEN 4 9MM Glock with a CARVER Custom 3 Port Decelerator Aluminum Comp. The Decelerator includes 3 ports on top with 2 ports on each side, totaling 7 ports to equalize the muzzle of your Glock. Thread sizes now available for KKM barrels in 9/16 x 32. Thread size and for LoneWolf or Storm Lake barrels in 1/2 x 28.

Easy installation. Compensator is made out of aluminum with either a black anodized finish or a silver brushed aluminum finish. The 3 Port Comp works great with factory ammo and handload equivalents. A proven product for IPSC, GSSF and Steel shooting.

This model is designed for GEN 4 Glocks only including the following:

• G17
• G34
• G17L
• G19
  
  When using our 3 Port Compensator on a GEN 4 model, you will need to use a lighter recoil spring when using factory ammunition or Major 9 loads. The stock guiderod for Gen 4 Glocks will "not" work with our compensators because the springs are too strong and can't be changed to a lighter resistant recoil spring. We recommend the following:
  
  
• If using factory loads, we recommend using a 10-11 lb spring for 9MM Comps (G17 Test Gun)
• If using Major loads, we recommend using
  a 14 lb spring for 9MM Comps (G17 Test Gun

All compensators require the use of a Gen 3 Guiderod with a reduced power spring.  Factory guiderods will not allow your gun to function when using a compensator.  All Gen 4 models require a Gen 4 bushing or equivalent to be used with the Gen 3 guiderod and reduced power recoil spring.)


(i)These are test springs recommended. Your loads and configuration may require a different weight recoil spring. Test your loads for the best recoil spring.(/i>

The use of a Gen 4 Bushing will be necessary with either the CARVER Captured or Uncaptured Guiderod system. This bushing is available online from B&B Enterprise.