Details
Tame the recoil and muzzle flip of your 9MM Glock when using factory light target loads with a CARVER Custom 3 Port Bullnose Aluminum Comp. This compensator includes 4 ports on top with 3 port on each side, totaling 10 ports to equalize the muzzle of your Glock. Thread sizes now available are 1/2 x 28. Easy installation. Compensator is made out of air craft aluminum with either a black anodized finish or a silver brushed aluminum finish. The 4 Port Bullnose Comp works great with 9MM Major Handloads. A proven product for IPSC, GSSF and Steel shooting.
This version is designed for Gen 1-2-3-4-5 Model Glocks with bullnose slides. Please feel free to order accordingly.
- G34
- G17L
- G19
This compensator was developed to provide a solution for the competitor that wants to take advantage of the features offered by a compensator but wants to use 9MM Major loads. This compensator is recommended to be used with Glock 34 models when using handloaded 9MM Major loads. Use this compensator with a 15lb Wolff or ISMI springs when using9MM Major loads in G17, G19. G17L or G34 models.
CARVER Bullnose Glock Decelerator 4 Port Alum Comp 9MM
CARVER Bullnose 9MM Compensators were designed to be used with suppressor barrels that are no longer or shorter than the following. The compensators will fit on longer barrels but will leave a gap between the rear of the comp and the front of the slide.
Glock Model |
Barrel Length |
Thread |
34 |
5.85" |
1/2 x 28 |
17 |
5.03" |
1/2 x 28 |
19 |
4.60" |
1/2 x 28 |
All compensators require the use of a Gen 3 Guiderod with a reduced power spring. Factory guiderods will not allow your gun to function when using a compensator. All Gen 4 models require a Gen 4 bushing or equivalent to be used with the Gen 3 guiderod and reduced power recoil spring.