Details
Each combo will include:
1 CARVER Custom Comp (9/16 32)
1 KKM Precision barrel (Comp length with 9/16 x 32 threads)
Combining the quality and rugged construction of the CARVER Custom Compensator with the Stainless Steel match grade KKM Precision barrel will give you a winning combination. The CARVER 2 Port Compensator will tame the muzzle flip with factory light target loads or minor loads.
KKM Precision match grade replacement barrels are manufactured from the highest grade mill select 416 stainless forgings. CNC machined and heat treated, providing a life time of service and unparalleled accuracy at an affordable price. The standard groove and land rifling make this an excellent choice for those who wish to shoot lead, plated or jacketed bullets. Can be used in factory ported or stock pistols. Intended for use in the Generation 1, 2, 3 and 4 Glock 17, 17L, 19 or 34 models only. Threaded 9/16 x 32.
Special features include:
•Ready to use, pre-fit drop in. No gunsmithing required.
•Precision machined from heat treated 416R stainless forgings.
•Oversized lock-up area produces greater shot-to-shot accuracy.
•Tighter dimensions than the original.
•Polished feed ramp and bore, diamond turned exterior
•Maximum chamber support, improved feed ramp design.
•Match grade broach cut rifling and target crown.
•Ok to use lead, plated or jacketed bullets.
Made in the USA
TIP: If using target loads or factory ammo, we recommend the use of a reduced power recoil spring. Due to the efficiency of our CARVER 2 Port Compensators, we recommend the following:
- Glock 17, use an 11-lb recoil spring or equivalent
- Glock 19, use an 11-lb recoil spring or equivalent
- Glock 34, use an 11-lb recoil spring or equivalent
Combos available to fit the following Glock models: - G17
- G34
- G19
- G22-9MM
IMPORTANT: The use of a compensator requires a reduced power recoil spring for target loads. A captured or uncaptured guiderod with the appropriate spring will be necessary for both in the use of a Gen 1-2 or 4 model Glock. Gen 4 guiderods will require a Gen 4 bushing. A factory guiderod/spring will not work when using a compensator. All parts are available on our website.
If you have questions about our compensators and/or combos, feel free to email us at sales@carvercustom.com