Details
Now Gen. 5 Glock 17 owners have the same ability to "tune" the Gock recoil system to specific loads just as Gen. 3 owners have! Our new Jager guide rods allow the use of standard Wolff recoil springs as used on our stainless and tungsten uncaptured guiderods, allowing you to tune the pistol for whatever ammunition you choose for improved performance and reliability.
The new Jager Gen. 5 captured Guide Rod for use with Wolff springs has been designed from the ground up, to avoid inconsistent cycling and lockup due to incorrect fit to frame. With the Jager Gen. 5 captured guide rod, the rear end of the rod sits properly in the frame with no movement or play. One of the main benefits of adding a steel guide rod is to improve consistency of cycling, not decrease consistency. This new recoil assembly has proven to cure the FTE malfunctions some Gen. 4 G17 owners are experiencing when using the correct recoil spring.
Weighs 1.3 oz with spring and bushing. The diameter of the guiderod is .270" to accomodate the larger inside diameter of the Wolff recoil spring.
The Jager patented bushing is included with guiderod. No other bushing is needed. This guiderod replaces the stock factory guiderod assembly.
NOTE: THIS IS FOR GUIDE ROD ONLY, PLEASE PURCHASE RECOIL SPRING SEPARATELY available as an option or through our online system.
This guiderod is intended for use with the ISMI springs only in a Gen 5 Glock G17 only.
BE SURE TO USE A DROP OF LOCTITE BLUE ON THE RETAINING SCREW!
If you have any questions, please contact us at sales@carvercustom.com or call us Mon-Fri at 904-800-6333, ext 2 from 11:00 AM through 4:00 PM (Eastern Time)